Removing TREX decking with hidden fasteners can be a headache for any DIYer or contractor. While hidden fasteners provide an attractive finish for decking, they can also make it difficult to remove boards without causing damage to the deck structure. In this article, we will provide you with step-by-step instructions on how to remove TREX decking with hidden fasteners, without damaging the surrounding boards or the deck's foundation.
Preparing for Deck Board Removal
Before you begin removing your TREX decking boards, you should gather all the necessary tools and safety equipment. You will need a drill, a hammer, a pry bar, a deck screw removal tool, a circular saw, and safety gloves and glasses. Once you have your tools in place, you can begin the deck board removal process.
Step 1: Removing the Fascia Boards
The first step in removing TREX decking is to detach the fascia boards. You can do this by drilling through the hidden fasteners located underneath the fascia board at every joist location. Once the screws have been removed, you can use a pry bar to gently lift the fascia board away from the joist. Carefully remove each fascia board one by one to avoid any damage to the surrounding boards.
Step 2: Detaching the Hidden Fasteners
Next, you will need to detach the hidden fasteners that secure the deck boards to the joists. You can use a deck screw removal tool or a pry bar to detach each fastener, one by one. If you're using a deck screw removal tool, insert the tool into the screw head and turn it counterclockwise to release the fastener. If you're using a pry bar, insert the bar under the fastener and apply gentle pressure to release it.
Step 3: Removing the Deck Boards
Once you've detached all the hidden fasteners, you can begin removing the TREX decking boards. Use a circular saw to cut each board into smaller sections. This will make it easier to remove the boards and help prevent any damage to other boards or the joists. Start at one end of the board and make a straight cut along the length of the board. Repeat this process for each board until they have all been successfully removed.
Step 4: Cleaning Up and Preparing for Installation
Now that your old TREX decking has been removed, it's time to clean up the work area and get it ready for installation. Use a broom or a vacuum to clean up any debris or dust left behind from the removal process. Inspect the joists and framing for any damage or rot and make any necessary repairs. Finally, it's time to install your new TREX decking using hidden fasteners or traditional screws.
Tips for Removing TREX Decking with Hidden Fasteners
1. Take your time when removing the boards to avoid causing any damage to the surrounding boards or the deck structure.
2. Use safety equipment such as safety gloves and glasses to protect yourself from flying debris.
3. Always inspect the joists and framing for damage or rot before installing new decking.
4. Consider using a deck screw removal tool to make the removal process faster and easier.
5. If you're unsure about any aspect of the deck board removal process, consult a professional contractor for assistance.
Removing TREX decking with hidden fasteners can be a challenging task, but with the right tools and techniques, it can be done safely and efficiently. By following the steps outlined in this article and using the tips provided, you can remove your old decking without causing any damage to the surrounding boards or the deck structure. Remember to take your time and always prioritize safety when undertaking any DIY project..