how to install trex hideaway fasteners

.

Installing Trex Hideaway Fasteners for your Deck: A Step-by-Step Guide

If you're planning to build your deck using Trex composite decking, it's important to know how to properly install the Trex Hideaway hidden fasteners. These fasteners help keep your deck boards securely in place while at the same time creating a smooth, seamless look. In this guide, we'll give you step-by-step instructions on how to install Trex Hideaway fasteners properly so you can enjoy a beautiful and sturdy deck for years to come.

Subheading 1: What are Trex Hideaway Fasteners?

Let's start with the basics. Trex Hideaway fasteners are hidden clips that are used to secure composite deck boards to the joists underneath. They come in two types: universal and start/stop fasteners. Universal fasteners are used for the main field of the deck, while start/stop fasteners are used for the perimeter and stair treads. Both types of fasteners are made of stainless steel, ensuring durability and resistance to corrosion.

Subheading 2: Tools and Materials Needed

Before you begin, make sure you have all the necessary tools and materials. You'll need a drill with a 1/8-inch drill bit, a screw gun, a saw, a chalk line, a measuring tape, and a hammer. You'll also need Trex Hideaway fasteners, composite decking boards, and joists.

Subheading 3: Measuring and Cutting the Deck Boards

Once you have your materials ready, you can start measuring and cutting your deck boards. Use a chalk line to mark where the joists are so you know where to place your fasteners. Then, measure the distance between joists and cut your deck boards to size. Make sure to leave a 1/16-inch gap between the boards to allow for thermal expansion.

Subheading 4: Installing the Fasteners

Now that you have your deck boards cut to size, it's time to install the fasteners. Start by placing the first deck board in place and inserting the first fastener on the edge of the board. Make sure it's flush with the board and then use your drill to screw it into the joist. Continue installing fasteners along the edge, spacing them every 16 inches. Once you've installed all the fasteners along the deck board's edge, slide the next deck board into place and repeat the process.

Subheading 5: Finishing the Perimeter and Stair Treads

Finally, you'll need to install start/stop fasteners along the perimeter and stair treads. These fasteners are designed to allow for a clean edge, and they fit into grooves on the underside of the deck boards. Make sure they're flush with the board and then use your screw gun to secure them to the joist. Once all your fasteners are installed, you'll have a beautiful, seamless deck that will last for years with minimal maintenance.

In conclusion, installing Trex Hideaway fasteners is an essential part of building a sturdy and beautiful composite deck. By following these simple instructions, you'll be able to install your fasteners with ease and create a deck that will be the envy of your neighborhood. Remember to take your time, measure carefully, and use the right tools and materials to ensure a successful installation.