how to install fiberon hidden fasteners

Installing decking boards on your outdoor space is a great way to add value to your home and create an enjoyable spot for entertaining and relaxation. However, the wrong type of fasteners can ruin the look of your decking project, and can even lead to safety hazards. This is where the Fiberon Hidden Fasteners come in handy.

Fiberon Hidden Fasteners are specially designed fasteners that make deck installation easy, quick and mess-free. They provide a seamless, smooth surface without visible screws or nails, leaving you with a beautiful, structurally sound deck that looks like it was installed by a professional. In this article, we will guide you through the process of installing Fiberon Hidden Fasteners, including the necessary tools to have and tips to make the installation process a breeze.

Tools and Materials Required

Before starting the installation process, here are the tools and materials you'll need:

- Fiberon Hidden Fastener Kit (You can purchase this at your local hardware store or online)

- A Drill

- A Drill bit

- Decking Screws

- A Chalk line

- A Measuring tape

- A Hammer or Rubber mallet

- A Level

Step 1: Preparing for Installation

Start by emptying the contents of the Fiberon Hidden Fastener Kit and familiarizing yourself with the kit's contents. Positioning, spacing, and installation requirements will vary based on the design of your decking, so ensure that you read the instructions provided carefully before starting.

Now, measure and mark the areas where the joists meet the ledger board using the chalk line to create your reference line. Next, ensure that you have adequate space to work in, and that the decking boards are cut to the desired size.

Step 2: Installing the Hidden Fasteners

With your reference lines in place, use your drill and drill bit to create pilot holes on the section of the decking board that goes over the joists. It's important to pilot the correct hole size as per the recommendations in the instruction manual. After pre-drilling your holes, place the hidden fasteners inside the pilot holes.

At this point, it's important to double-check that the fasteners are securely placed in the pilot hole and are flush with the decking board. You can use a hammer or rubber mallet to tap the fasteners into place.

Step 3: Placing the Decking Boards

After installing the hidden fasteners, line up your decking board flush with your chalk line, making sure that it's straight and level. Before screwing the decking board bearing in mind the gap requirements is also essential to prevent warping and shrinking over time. This is one of the essentials of Fiberon decking boards so that you have a structurally sound deck.

With the decking board in place, use the drill and screws to attach the board to the joist underneath. Do the same for all subsequent decking boards, and ensure that you leave the recommended gap in between the boards.

Step 4: Finishing Up

Now that all your decking boards are in place, it's time to finish up the installation process. Using the drill or driver, attach the pattern screw into the predetermined spaces into the hidden fastener directly under the decking board.

After all screws are attached, simply cover them up and keep them as neatly hidden as possible.

Five Tips for Installing Fiberon Hidden Fasteners

1. Measure and mark precisely, ensuring that your reference lines align with your joist for the entire deck's frame.

2. Pre-drill holes for the hidden fasteners to avoid splitting the decking boards.

3. Only use the recommended screws by Fiberon to prevent any rust, vapor buildup, or pressure.

4. Leave the recommended gap to improve proper air circulation that helps the decking last longer.

5. Ensure that you apply pressure on the board when tapping the hidden fastener into place, to prevent any unwanted gaps that will cause accidents.

Final Thoughts

Using Fiberon Hidden Fasteners is a game-changer for both professional and beginner deck installers. With these simple steps and essential tools, you can effortlessly install your decking project without the annoyance of visible screws or nails. Not only does this provide a sleek finish, but it also ensures that your family and guests are safe from any potential sharp objects. Follow the tips outlined in this article and enjoy the longevity and aesthetic of your new decking!