Where to Buy Goboard Fasteners: The Ultimate Guide
If you are planning to install GoBoard, a waterproof foam board that can be used as a tile backer, you will need to purchase the right fasteners to ensure a secure and reliable installation.
In this article, we will guide you through the different types of GoBoard fasteners and where to buy them. But before delving into that, let's briefly go over the basics of GoBoard installation.
A Quick Overview of GoBoard Installation
GoBoard is an ideal solution for tiling in areas with high moisture, such as bathrooms, showers, and kitchens. The installation process is straightforward, but make sure you follow the manufacturer's instructions to achieve a successful, long-lasting installation.
Here's a quick summary of the installation process:
1. Prepare the substrate: Make sure the substrate (the surface that GoBoard will be installed on) is clean, dry, and structurally sound.
2. Attach GoBoard to the substrate: Use GoBoard's cement board screws to attach the board to the subfloor or wall studs. The screws should be spaced no more than 8 inches apart.
3. Seal the seams: Use the GoBoard sealant to seal the seams between the boards. This will prevent water from seeping through the joints and causing damage.
4. Tile installation: Once the board is properly installed and the seams are sealed, you can start installing the tiles on the board.
Now that you have an idea of the installation process, let's take a closer look at the different types of GoBoard fasteners available.
Types of GoBoard Fasteners
1. Cement Board Screws
The cement board screws are used to attach the GoBoard to the substrate. They are available in different lengths to accommodate different substrate thicknesses.
The screws have a special design that makes it easy to sink them into the board without damaging it. They also come with a corrosion-resistant coating, making them suitable for wet environments.
Where to buy cement board screws for GoBoard:
- Home Depot
- Lowe's
- Amazon
2. Tiling Screws
Tiling screws are used to secure the tiles to the GoBoard. They are available in different lengths and sizes to accommodate different tile thicknesses and materials.
Make sure to choose the right screw for your tile type to avoid cracking or damaging the tiles.
Where to buy tiling screws for GoBoard:
- Home Depot
- Lowe's
- Amazon
3. Sealant
The GoBoard sealant is used to seal the seams between the boards. It is specially formulated to bond with the GoBoard and create a waterproof seal that prevents water from seeping through the joints.
Where to buy the GoBoard sealant:
- Home Depot
- Lowe's
- Amazon
4. Corner and Joint Tape
The corner and joint tape is used to reinforce the corners and seams of the GoBoard. It is made of durable fiberglass mesh that adds extra strength to the installation.
Where to buy the GoBoard corner and joint tape:
- Home Depot
- Lowe's
- Amazon
5. Washers
Washers are used to secure the cement board screws to the substrate. They provide extra support and prevent the screws from pulling out of the substrate.
Where to buy washers for GoBoard:
- Home Depot
- Lowe's
- Amazon
Where to Buy GoBoard Fasteners
Now that you know the different types of GoBoard fasteners, you may be wondering where to buy them.
The good news is that GoBoard fasteners are widely available at most home improvement stores, hardware stores, and online retailers.
Here are some popular places to buy GoBoard fasteners:
1. Home Depot
Home Depot is a great place to find GoBoard fasteners. They have a wide selection of screws, sealant, corner and joint tape, and washers. You can either shop online or visit one of their stores.
2. Lowe's
Lowe's is another popular retailer that carries GoBoard fasteners. They have a good selection of screws, sealant, corner and joint tape, and washers. You can shop online or visit one of their stores.
3. Amazon
If you prefer to shop online, Amazon is a great place to find GoBoard fasteners. They have a wide selection of fasteners, and you can have them delivered to your doorstep.
Conclusion
Installing GoBoard is a cost-effective and durable way to waterproof your tile installation. To ensure a successful installation, make sure to use the right fasteners and follow the manufacturer's instructions.
Cement board screws, tiling screws, sealant, corner and joint tape, and washers are all essential GoBoard fasteners that you will need for your installation.
These fasteners are widely available at most home improvement stores, hardware stores, and online retailers, such as Home Depot, Lowe's, and Amazon.
We hope this guide has helped you learn more about GoBoard fasteners and where to buy them. Happy installing!
.