how to use camo hidden deck fastening system

How to Use Camo Hidden Deck Fastening System: A Step-by-Step Guide

Building a deck takes a lot of work and careful planning. One of the most important considerations is how you will attach the deck boards to the frame. The Camo Hidden Deck Fastening System offers a unique solution that is easy to install and provides a cleaner, more professional finish. In this guide, we will show you how to use the Camo system to build your own beautiful and functional deck.

Subheading 1: What is the Camo Hidden Deck Fastening System?

Before we dive into the installation process, let's take a closer look at what the Camo system is and how it works. Essentially, it is a set of specially-designed screws that are driven in at an angle through the sides of the deck boards, rather than from the top down. This creates a hidden fastening system that is invisible from the surface of the deck, giving it a sleek and modern appearance.

Subheading 2: Tools and Materials Required

Before you begin installing the Camo system, make sure you have all of the necessary tools and materials on hand. Here's what you'll need:

- Camo Marksman tool (available for both grooved and solid boards)

- Camo driver bit

- Camo screws

- Drill with 1/8" drill bit

- Safety glasses

- Deck boards

- Deck frame

Subheading 3: Installing the Camo System

Step 1: Lay out your deck boards and frame as you normally would. Make sure everything is level and square before proceeding.

Step 2: Install the Camo Marksman tool onto your drill, following the manufacturer's instructions. For grooved boards, make sure the tool is lined up with the groove. For solid boards, position the tool in the center of the board.

Step 3: Set the first Camo screw into the screw guide on the Marksman tool. Hold the tool at a 45-degree angle and insert the screw into the side of the board, just below the top edge. Drive the screw in using a slow, steady motion.

Step 4: Move the tool along the length of the board, inserting screws at regular intervals (typically every 12-16 inches). For best results, position the screws in a zigzag pattern to maximize holding power.

Step 5: Once all the screws have been inserted, use a hammer or rubber mallet to tap down any raised or uneven boards. This will ensure a smooth and even surface for your deck.

Subheading 4: Tips and Tricks for Camo Installation

While the Camo system is relatively easy to install, there are a few tips and tricks that can help make the process go more smoothly:

- Use camo screws that are long enough to penetrate both the deck board and the frame below. This will ensure a secure hold.

- Take care to line up the Marksman tool precisely with the center of the board or groove. A misaligned tool can result in crooked screws or uneven boards.

- Depending on the type of wood you are using, you may need to pre-drill holes for the Camo screws. This will help prevent splitting or cracking of the wood.

- Always wear safety glasses when installing the Camo system, as wood chips and debris may fly up during drilling.

Subheading 5: Enjoy Your Beautiful New Deck

With the Camo Hidden Deck Fastening System, you can create a deck that is not only durable and functional, but also visually stunning. By eliminating the need for visible screws or nails, the Camo system gives your deck a clean and modern look that will be the envy of all your neighbors. With proper installation and care, your deck will provide years of enjoyment for you and your family.