Replacing your old composite decking can greatly improve the look of your outdoor space. One thing to consider when replacing your old decking boards is to upgrade to hidden fasteners. Not only do hidden fasteners provide a sleek, polished finish, but they also eliminate visible screw heads and make it easier to replace individual boards in the future. Here’s a step-by-step guide on how to replace composite decking with hidden fasteners.
1. Remove the old decking boards
The first step is to remove the old decking boards. Start by removing any screws or nails along the perimeter of your deck. Then, use a pry bar to gently lift the boards and remove them from the deck joists. Be sure to inspect the joists for any damage or rot while you have the old boards removed.
2. Install new joists, if needed
If your existing joists are damaged or rotting, you will need to replace them before installing new decking boards. Use pressure-treated lumber for a long-lasting, durable solution.
3. Choose your hidden fasteners
There are a variety of hidden fastener systems on the market, so it’s important to choose the one that’s right for your decking material and design. Consult your local building supply store or contractor for advice on which hidden fastener system to use.
4. Install the hidden fasteners
Once you have your new joists installed and your hidden fastener system chosen, it’s time to install the fasteners. Follow the manufacturer’s instructions carefully for the best results. Typically, hidden fasteners are installed into the side grooves of the decking boards, and then secured to the joists using a clip or fastener.
5. Install the new decking boards
Once your fasteners are securely in place, it’s time to install the new decking boards. Be sure to leave a small gap between each board to allow for expansion and contraction. Use a rubber mallet or hammer to gently tap the boards into place on the hidden fastener clips.
6. Finishing touches
Once your new decking boards are installed, it’s time to add the finishing touches. Use a circular saw or jigsaw to cut any boards to fit around posts, railings, or other obstacles. If you’ve chosen a composite decking material, be sure to use a deck cleaner and brightener to remove any residual dust or debris.
Replacing your old composite decking with hidden fasteners can be a time-consuming process, but the results are well worth it. Not only will your outdoor space look polished and modern, but hidden fasteners also provide a safer, more secure finish. Take the time to carefully plan and execute each step of the process for a beautiful, long-lasting new deck..