how to remove fastener clips


How to Remove Fastener Clips: A Step-by-Step Guide

Fastener clips are small plastic or metal pieces that hold various parts of a vehicle, such as the bumper, fender, or interior panel, in place. Although they are meant to be durable and long-lasting, fastener clips can become damaged, worn out, or stuck over time. Removing them can be a daunting task, but it doesn't need to be. In this article, we will provide you with a step-by-step guide on how to remove fastener clips safely and efficiently.

Subheading: The Tools You Need

Before you start removing fastener clips, you need to ensure you have the right tools for the job. The following are the tools that you need to have:

1. Plastic trim removal tool: This tool is designed to pry apart plastic fasteners, and it eliminates the possibility of damaging the surrounding areas.

2. Flathead screwdriver: If you are working with metal fasteners, then you will need a flathead screwdriver to remove them.

3. Pliers: Depending on the type of fastener clip you are working with, you might need to use pliers to loosen and remove the clip.

4. Claw hammer: If you are working with metal fastener clips that are difficult to remove, then a claw hammer can come in handy.

Subheading: How to Remove Plastic Fastener Clips

Plastic fastener clips are the most common type of fasteners found in modern vehicles. To remove these clips, follow these steps:

1. Locate the clip: You can find the fastener clip on the underside of the panel you want to remove.

2. Pry open the clip: Using a plastic trim removal tool, carefully pry open the clip by inserting the tool between the panel and the clip.

3. Pull out the clip: Once you have pried open the clip, pull it out of the panel using your fingers or pliers.

Subheading: How to Remove Metal Fastener Clips

Metal fastener clips are found on older vehicles and are much stronger and more durable than plastic clips. However, they can be difficult to remove. Here's how to do it:

1. Locate the metal clip: Metal clips are usually found on the underside of the panel, and they may be oblong or circular in shape.

2. Loosen the clip: Using a flathead screwdriver, insert the tip of the screwdriver under the clip and gently pry it open.

3. Remove the clip: Once the clip has been loosened, pull it out of the panel using pliers or a claw hammer.

Subheading: How to Remove Stuck Fastener Clips

Over time, fastener clips can become stuck due to corrosion, dirt, or grime buildup. Here's what you need to do to remove stuck fastener clips:

1. Apply lubricant: Spray some lubricant, such as WD-40, around the edges of the stuck clip.

2. Tap the clip: Use a claw hammer to tap the clip gently to loosen it up.

3. Use pliers: Once the clip has been loosened, use pliers to remove it from the panel.

Subheading: Tips for Removing Fastener Clips

Removing fastener clips can be a challenging task, but there are some tips that can make the process easier:

1. Use the right tool: Always use the appropriate tool for each type of fastener clip. Using the wrong tool can damage the clip and surrounding areas.

2. Don't force it: If the clip is difficult to remove, don't force it, as this can cause damage to the panel.

3. Keep track of the clips: When removing multiple clips, keep track of them to ensure that they are replaced in their correct locations.

4. Replace damaged clips: If a fastener clip is damaged or worn out during removal, replace it with a new one to ensure that the panel remains secure.


Removing fastener clips can seem daunting at first, but with the right tools and techniques, it can be a relatively easy process. Whether you are removing plastic or metal clips, follow our step-by-step guide to ensure that you do it safely and efficiently. Remember to keep track of the clips and replace any damaged ones to keep the panel secure.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
Tiếng Việt
bahasa Indonesia
Current language:English