how to remove broken shutter fasteners from brick

2023/06/02

How to Remove Broken Shutter Fasteners from Brick


If you have installed shutters on your house, you know that the process can be quite involved. It is crucial that the shutters are installed correctly, using the proper fasteners, to ensure their stability in different weather conditions. Unfortunately, over time, fasteners can break, especially if they were not installed properly in the first place. A broken shutter fastener can compromise the integrity of the shutter, which could potentially lead to damage to your home's exterior. In this article, we will discuss how to remove broken shutter fasteners from brick.


What are Shutter Fasteners?


Shutter fasteners are the screws, nails, or clips that hold your shutters in place on your home's exterior. They are often made of materials that will not rust, such as stainless steel or aluminum, to prevent corrosion and damage to the fastener over time.


What Causes Fasteners to Break?


Fasteners can break for several reasons. One common cause is improper installation. If the fastener is not inserted in the correct position or angle, it may loosen and break over time. Vibration from the wind or other factors can also cause fasteners to break. Rust or corrosion can also weaken the fastener, leading to eventual breakage.


Tools You Will Need


Before attempting to remove broken shutter fasteners, you will need a few tools to get the job done. These tools include:


- Hammer

- Chisel

- Pliers

- Power drill

- Concrete drill bit

- Screw extractor

- Masking tape


Step 1: Preparation


Before you start to remove the broken fasteners, you need to prepare the area around the shutter. Place masking tape around the shutter to protect the brick's surface from damage during the removal process.


Step 2: Remove the Shutter


The first step in removing a broken fastener is to remove the shutter from the wall. In some cases, it may be necessary to remove more than one shutter to access the broken fastener. Use a power drill or screwdriver to remove any remaining fasteners and carefully remove the shutter from the wall.


Step 3: Remove the Broken Fastener


Once the shutter has been removed, you can access the broken fastener. You will need to use a concrete drill bit to create a pilot hole in the center of the broken fastener. Make sure that the diameter of the hole is slightly smaller than the screw extractor you will be using.


Step 4: Insert the Screw Extractor


Insert the screw extractor into the newly drilled hole and turn it clockwise with pliers or a wrench. The screw extractor should grip the broken fastener tightly and allow you to remove it from the brick.


Step 5: Clean the Hole


After removing the broken fastener, use a chisel or wire brush to clean out any debris or rust that may be left behind in the hole. Ensure that the hole is clean and free of any debris before proceeding to the next step.


Step 6: Install a New Fastener


After cleaning the hole, you can install a new fastener to secure the shutter back onto the wall. Make sure to choose a high-quality fastener that is designed for use in brick. Use a power drill to insert the new fastener into the hole and secure the shutter back onto the wall.


Conclusion


Removing broken shutter fasteners from brick may seem like a daunting task, but it can be done with the right tools and techniques. By following these steps, you can remove broken fasteners and protect your home's exterior from damage. Remember to always choose high-quality fasteners and to install them correctly to prevent future issues. Proper maintenance and regular inspection of your shutters can help prevent fastener failure and ensure the longevity of your shutters.

.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
简体中文
dansk
العربية
italiano
日本語
한국어
Nederlands
русский
Español
Português
français
Deutsch
Tiếng Việt
ภาษาไทย
svenska
Српски
हिन्दी
Română
Bosanski
اردو
עִברִית
Polski
বাংলা
bahasa Indonesia
Pilipino
Македонски
Gaeilgenah
български
Türkçe
Magyar
čeština
Українська
Current language:English