How to Measure Quarter Turn Fasteners
Quarter turn fasteners, also known as Dzus fasteners, are commonly used in the aerospace and mechanical industry as a quick-release mechanism to secure panels, doors, and fasteners. The proper installation of these fasteners is essential for the safety of the equipment and personnel. One of the most critical steps in installing a quarter turn fastener is measuring it and ensuring that it fits correctly. This article will guide you through the steps to Measure Quarter Turn fasteners properly.
What are Quarter Turn Fasteners?
Quarter turn fasteners are designed to provide fast, reliable, and secure installation and removal for quick access to equipment that requires periodic inspection or maintenance. These fasteners are commonly used in automobile racing, aviation, and military applications. These fasteners consist of two parts – the stud and the receptacle. The stud is mounted on one panel, and the receptacle is mounted on the adjacent panel, and once the stud is pushed into the receptacle, it rotates 90-degrees, locking the two panels together.
Why is Measuring Quarter Turn Fasteners Important?
Measuring Quarter Turn Fasteners correctly is an essential step in ensuring that the fasteners fit correctly, and the panels are secure. Failing to measure the fasteners correctly could lead to inadequate fastening, which could result in a misaligned panel or loosening panels due to vibration. This can lead to catastrophic consequences in the aerospace and mechanical industry that can lead to fatal consequences. It's also important to ensure that the fasteners' parts are properly aligned, or the fastening system may not function correctly.
Step-by-Step Guide to Measuring Quarter Turn Fasteners
Here are the steps to measure quarter turn fasteners:
Step 1: Determine the Fastener's Size
The first step in measuring quarter turn fasteners is to determine the size of the fastener you need. The size of the fastener is based on the diameter of the stud that you want to use. You can determine the size of the fastener by measuring the stud's diameter or checking the manufacturer's specifications. Once you know the size of the stud, you can choose the correct receptacle size that fits the stud.
Step 2: Measure the Length of the Stud
The next step is to measure the length of the stud. Quarter turn fasteners come in different lengths, and the length of the stud you need depends on the thickness of the panels you want to fasten. To measure the length of the stud, place a ruler or a tape measure at the base of the stud and measure it to the top of the thread.
Step 3: Measure the Diameter of the Stud Head
The next step is to measure the diameter of the stud head. The diameter of the head will determine the size of the mounting hole. Use a caliper to measure the diameter of the head, or you can check the manufacturer's specifications.
Step 4: Measure the Diameter of the Receptacle Hole
The next step is to measure the receptacle hole's diameter, which is the hole where the stud is inserted when fastening the panels. To measure the diameter of the receptacle hole, use a caliper and measure the hole's inner diameter.
Step 5: Check the Alignment of the Stud and the Receptacle
The final step in measuring quarter turn fasteners is to check the alignment of the stud and the receptacle. It's essential to ensure that the fastener's parts are aligned correctly; otherwise, the fastening system may not work correctly. To check the stud and the receptacle's alignment, insert the stud into the receptacle and turn it 90 degrees. If the stud and the receptacle are not aligned, it can lead to inadequate fastening.
Measuring quarter turn fasteners is a critical step in ensuring that the panels are securely fastened in the aerospace and mechanical industry. This guide gives you step-by-step instructions to measure the fasteners correctly. Remember always to install quarter turn fasteners correctly to prevent costly mistakes and personal injury..