how to measure a dzus fastener

2023/05/31

Measuring a Dzus Fastener: A Guide for Beginners


Dzus fasteners are a type of quarter-turn fastener that are often used in aerospace and racing industries. They are commonly used to secure panels and access doors in high-stress environments. However, measuring a Dzus fastener can be challenging for beginners. In this article, we'll provide a step-by-step guide on how to measure a Dzus fastener.


What is a Dzus Fastener?


A Dzus fastener is a type of quarter-turn fastener that was developed in the 1930s by William Dzus. It consists of two parts: a receptacle and a stud. The receptacle is mounted on the surface and the stud is attached to the panel or door. When the two parts are aligned, the stud is inserted into the receptacle and turned a quarter turn. This locks the panel or door in place.


Step 1: Measure the Diameter of the Stud


The first step in measuring a Dzus fastener is to measure the diameter of the stud. This is the threaded part of the fastener that protrudes from the panel or door. To measure the diameter, you can use a caliper or a ruler. Place the caliper or ruler perpendicular to the stud and measure the distance between the two opposite flat sides.


Step 2: Measure the Length of the Stud


The next step is to measure the length of the stud. This is the distance between the bottom of the threaded part and the head of the stud. To measure the length, you can use a ruler or a depth gauge. Place the ruler or depth gauge parallel to the stud and measure the distance from the bottom to the head.


Step 3: Measure the Diameter of the Receptacle


The third step is to measure the diameter of the receptacle. This is the hole in the surface where the receptacle is mounted. To measure the diameter, you can use a caliper or a ruler. Place the caliper or ruler perpendicular to the surface and measure the distance between the two opposite flat sides.


Step 4: Measure the Thickness of the Surface


The fourth step is to measure the thickness of the surface where the receptacle is mounted. This is important because the length of the receptacle depends on the thickness of the surface. To measure the thickness, you can use a caliper or a ruler. Place the caliper or ruler perpendicular to the surface and measure the distance between the two opposite flat sides.


Step 5: Determine the Type of Dzus Fastener


The final step is to determine the type of Dzus fastener you need. There are many different types of Dzus fasteners, each with its own unique features and specifications. Some factors to consider when choosing a Dzus fastener include the material, finish, length, diameter, and strength.


Conclusion


In conclusion, measuring a Dzus fastener is an essential task for anyone working in the aerospace or racing industry. By following the steps outlined in this article, you can easily measure the diameter and length of the stud, the diameter of the receptacle, and the thickness of the surface. Once you have these measurements, you can determine the type of Dzus fastener you need for your specific application. Whether you're replacing a worn out fastener or installing a new one, proper measurement is key to a successful installation.

.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
简体中文
dansk
العربية
italiano
日本語
한국어
Nederlands
русский
Español
Português
français
Deutsch
Tiếng Việt
ภาษาไทย
svenska
Српски
हिन्दी
Română
Bosanski
اردو
עִברִית
Polski
বাংলা
bahasa Indonesia
Pilipino
Македонски
Gaeilgenah
български
Türkçe
Magyar
čeština
Українська
Current language:English