How to Make Paper Fasteners
Paper fasteners are essential for anyone who deals with paper on a regular basis. They help keep documents organized and can be used for a variety of projects. Unfortunately, store-bought paper fasteners can be expensive and limited in selection. In this article, we’ll show you how to make paper fasteners on your own, providing you with a cost-effective solution that also allows for customization.
Supplies You Will Need
Before we get into the how-to, let’s gather the necessary supplies. All of these items can be found at your local craft store or ordered online:
- Paper clips
- Decorative paper
Now that we have our supplies, let’s dive into the steps to create your own paper fasteners.
Step One: Cutting the Paper
The first step is to cut the decorative paper into strips that are roughly 1 inch by 3 inches. The exact size isn’t critical, but you want to be sure that the strips are long enough to have some overlap on a standard sheet of paper. If the strip is too short, it will not hold well.
Step Two: Folding the Paper
Using a ruler and pencil, draw a line down the center of the paper strip. Next, fold the strip in half along the line you’ve drawn, creasing the paper firmly.
Step Three: Creating the Tabs
Using your scissors, make two cuts perpendicular to the folded edge of the strip that are roughly a quarter inch away from each other. These cuts should be on the opposite side of the fold, leaving the side with the crease untouched. Once cut, gently fold out the tabs you’ve created.
Step Four: Adding the Paper Clip
Now we need to add the paper clip. Space the paper clip so that it will sit on the bottom tab, with the top tab overlapping it. Add a small amount of glue to the inside of the top tab, and then fold it down over the paper clip, securing it to the bottom tab. Be sure that the glue has completely dried before putting the fastener to use.
Step Five: Decorating the Fastener
Now that you’ve got the basics down, it’s time to get creative! The sky's the limit when it comes to decorating your paper fasteners.
Subtitle: Decorating Your Paper Fasteners
To add some pizzazz to your fasteners, use stamps, stickers, or your own artwork to decorate the tops of the fasteners. You can also use patterned scrapbook paper or colored cardstock to create a base for the fastener.
Subtitle: Other Uses for Paper Fasteners
Beyond holding papers together, paper fasteners can be used in a variety of ways. For example, they make great bookmarks or can be used to create interactive craft projects.
Subtitle: Alternatives to Paper Clips
While paper clips are the most commonly used item to create paper fasteners, there are other items you can use if you don’t have any on hand. Try using brads or small binder rings for a different look.
Subtitle: Creating Custom Sizes
In some cases, you may need a larger or smaller fastener than the size we’ve provided. To make a larger fastener, increase the width of the paper strip before folding. To make a smaller fastener, trim the paper strip before folding.
Subtitle: Tips for Success
When creating your fasteners, be sure to use a heavy-duty glue that can hold the weight of the paper and clip. Also, take your time when folding the paper and making the cuts for the tabs. A small mistake can lead to the fastener not holding up properly.
By following these simple steps, you can make paper fasteners that are both functional and fun. Whether you need them for work or play, the possibilities are endless when it comes to creating unique and customized fasteners. So, grab your supplies and get to crafting your own paper fasteners today!.