How to Install Trex with Hidden Fasteners
Are you getting ready to install Trex decking? If so, you may be considering using hidden fasteners. Hidden fasteners offer many advantages over surface screws, including a cleaner appearance and reduced chance of splinters. In this article, we'll walk you through the steps of installing Trex with hidden fasteners.
Choosing Hidden Fasteners
Before you start installing your Trex decking, you'll need to choose the right hidden fasteners for your project. There are several options available, including clip systems, plug systems, and biscuit systems. Clip systems are the most popular choice and involve attaching a clip to the groove on the side of each board. Plug systems require drilling a hole in each board and inserting a plug into the hole, while biscuit systems involve cutting a slot into each board and inserting a biscuit into the slot.
Preparing Your Decking
The first step in installing your Trex decking with hidden fasteners is to prepare your decking. Make sure that your deck framing is level and structurally sound. If necessary, replace any damaged or rotting boards. Once your framing is in good shape, measure the area where you'll be installing your decking to determine how much material you'll need. Next, trim the ends of your boards to ensure that they're square and the same length.
Installing Hidden Fasteners
Once you've prepared your decking, you're ready to install your hidden fasteners. Begin by installing the fasteners on the perimeter boards. This will create a border around your deck that will help to hold the rest of the decking in place. Then, work your way toward the center of your deck, installing the fasteners as you go. Be sure to follow the manufacturer's instructions for spacing and placement.
Attaching Your Decking
Once your fasteners are in place, it's time to start attaching your decking. Start by placing the first board in position, making sure that it's aligned properly. Then, slide the next board into place, inserting it into the groove on the side of the first board. Continue this process until all of your decking is in place.
Finishing Up
With your decking in place, you're almost done! If you used plug or biscuit systems, you'll need to fill any screw holes with plugs or biscuits. Then, use a smooth hand saw or a router to trim any excess material from the ends of your decking. Finally, give your deck a thorough cleaning to remove any debris or sawdust.
Conclusion
Installing Trex decking with hidden fasteners is a great way to achieve a clean, streamlined look for your deck. With the right tools and a little bit of know-how, you can easily install your decking with hidden fasteners. By following the instructions in this article, you'll be enjoying your new deck in no time!
.