Installing Trex Hidden Deck Fasteners: A Step-by-Step Guide
When you're building a deck, the fasteners you use can make all the difference in the look and longevity of your finished product. Trex hidden deck fasteners provide a clean, seamless look for your deck while also ensuring long-lasting durability. Here's what you need to know to install them properly.
Why Use Trex Hidden Deck Fasteners?
Trex hidden deck fasteners are an excellent choice for several reasons. First, they allow for a clean, fastener-free deck surface. This means your deck will have a sleek, polished look without visible screws or nails. The fasteners also ensure that the deck boards remain securely in place without warping, buckling or showing any other signs of wear-and-tear. Additionally, the fasteners are made from high-quality, corrosion-resistant materials that will last for years, even in harsh environments.
What You'll Need
Before you start your Trex hidden deck fastener installation, gather these essential materials:
- Trex fasteners
- Porch or deck boards
- Drills (for screws)
- Measuring tape
- Chalk line
- Safety equipment (goggles, ear protection, etc.)
Step 1: Prepare the Deck Surface
Make sure to prepare the deck surface before you begin installation. Get rid of any remaining nails or screws from previous installations. Then, sweep and clean the surface to ensure it's free of debris and dust.
Step 2: Complete the Frame
Complete the frame before filling it in with composite boards. This step ensures that the frame has a solid and level foundation before installation begins. Once the frame is complete, calculate the number of boards you need to fit your deck using your measuring tape.
Step 3: Mark References Points
Mark reference points on your porch or deck boards using a chalk line. Plan for at least two lines, depending on the width and length of your deck. These lines will outline where you'll later put your fasteners on the board's side.
Step 4: Install the Board onto the Deck System
Position the board to the top of the deck system when you install it. Ensure that there is at least one end installed in the center of the joist, without the use of a fastener. Secure it in place into the joist with a screw at a 30° to 45° angle.
Step 5: Install the Trex Hidden Fasteners
Using the board's side joint, slide in Trex Hidden fasteners onto each board's sides by holding onto the plastic part of the fastener to ensure it doesn't get damaged. The fasteners must then be driven into the joist or frame by drilling a screw through the fastener's center hole. Install two fasteners per joist, except for the first side on every board; this side only needs one fastener. The ending of every board ends laterally to the last joist or with a perpendicular line, making it possible for gap spacing and stabilization.
Step 6: Repeat the Process
Repeat the above steps until you swipe across your deck.
Trex hidden deck fasteners provide an easy way to install your deck or porch boards while also ensuring a finished look that doesn't require visible nails or screws. Follow these steps carefully to ensure a secure and lasting installation..