How to Install TimberTech Hidden Fasteners
If you're looking for a sleek and polished decking look, hidden fasteners are the way to go. In this article, we'll guide you through the installation process of TimberTech hidden fasteners.
What are TimberTech Hidden Fasteners?
TimberTech hidden fasteners are designed to offer a seamless decking surface without the use of face screws. The fasteners secure the decking boards to the joists from the sides instead of the top, which ensures a clean and polished look.
Why Use TimberTech Hidden Fasteners?
Apart from aesthetics, TimberTech hidden fasteners provide additional benefits. They allow for natural expansion and contraction of the decking boards, making them more durable and resistant to warping. Additionally, they prevent moisture from getting trapped between the decking surface and the joists, reducing the risk of rotting and decay.
Before you begin the installation process, here are the essential tools you'll need:
- 1/8-inch drill bit
- Pneumatic nailer
- TimberTech hidden fasteners
- TimberTech decking boards
- Measuring tape
- Chalk line
Follow these steps to install TimberTech hidden fasteners:
Step 1: Measure and Mark the Joists
Using a measuring tape, mark the joists in 16-inch increments to indicate the spacing for the fasteners. Use a chalk line to snap a straight line across the joists, ensuring that the fastener spacing is consistent.
Step 2: Pre-drill the Grooves
Pre-drill a 1/8-inch pilot hole into the groove of each decking board. This will prevent the boards from splitting when the hidden fasteners are installed.
Step 3: Insert the Hidden Fasteners
Insert the TimberTech hidden fasteners into the pilot holes on each side of the joist. Make sure the fasteners are snug and flush with the decking board.
Step 4: Secure the Decking Boards
Using a pneumatic nailer, secure the decking board onto the joists, ensuring the fasteners are securely in place. Repeat the process for each decking board, ensuring that each board is spaced evenly, and the fasteners are securely in place.
Step 5: Finishing Touches
To finish off the installation, plug the holes left by the fasteners using TimberTech color-matched plugs. This will provide a polished finish while hiding the fasteners.
Installing TimberTech Hidden Fasteners is a straightforward process that requires minimal tools and expertise. By following these steps, you can ensure a seamless and polished decking appearance, while also increasing the longevity and durability of your deck..