how to attach snap fasteners


Attaching snap fasteners to your garments is an easy and convenient way to secure them. These tiny fasteners come in a variety of sizes and shapes and are used to keep everything from shirts to bags tightly closed. The process may seem intimidating, but it's a simple task that anyone can accomplish with just a bit of practice. In this article, we will guide you through the process of attaching snap fasteners, step by step.

Why use Snap Fasteners

Snap fasteners are incredibly useful when it comes to securing garments. They are perfect for people who don't want to use buttons or zippers; they are easy to open and close, and you can attach them to different types of fabric. Another advantage of snap fasteners is that they can come in different colors and designs, giving you more options to accessorize your garments.

Materials needed

Before you start attaching the snap fasteners, make sure you have all the materials that you need. You will need the following:

- Snap fasteners: There are different types of snap fasteners, but the most common types are prong snap fasteners and sew-on snap fasteners. Ensure that you are using the right type of snap fastener for your garment.

- Marking tool: You will need a marking tool, such as a pen or chalk, to mark the areas where you will attach the snap fasteners.

- Scissors: You will need scissors to cut the excess fabric around the snap fastener.

- Snap fastener pliers: Snap fastener pliers are specialized pliers used to attach snap fasteners. Ensure that you are using the right pliers for the snap fastener you are using.

Steps to Attach Snap Fasteners

Step 1: Determine Where to Attach the Snap Fasteners

Decide where you want to attach the snap fasteners. The location for the snap fasteners may vary depending on the garment you are working on. Generally, a snap fastener should be placed where there's the most strain on the garment's closure. Mark this location with a marking tool.

Step 2: Install the Snap Fasteners

If you are using prong snap fasteners, insert the prongs through the fabric in the marked location. Then insert the back of the snap onto the prongs from the opposite side of the fabric. Align the snap fastener and clip it into place using the snap fastener pliers. The pliers will crimp the prongs onto the back of the snap as you squeeze the pliers.

If you are using sew-on snap fasteners, sew one half of the snap fastener onto the marked location on one part of the fabric. Then, sew the other half of the snap fastener onto the marked location on the other part of the fabric. You can use a matching thread or a contrasting thread to sew the snap fastener.

Step 3: Test the Snap Fasteners

After both halves of the snap fastener have been attached to the garment, test the snap fastener by opening and closing it a few times. Make sure that the fastener snaps shut properly and holds the garment securely.

Step 4: Finishing Touches

Trim the excess fabric around the snap fasteners, and you are done!

Snap Fastener Tips & Tricks

- Always test your snap fasteners before attaching them.

- If you don't have snap fastener pliers, you can use a hammer and a flat-headed screwdriver to attach snap fasteners.

- Make sure you are using the right type of snap fastener for the fabric you are working with.

- If your snap fastener is too big for the pliers, place a small piece of fabric underneath the snap fastener when crimping it.

- Consider using a small amount of fabric glue to hold the snap fastener in place before crimping it.


Attaching snap fasteners is a simple process, and with a bit of practice, you'll be a pro in no time. Remember to choose the right type of snap fastener and use the correct tools to prevent any mishaps. Snap fasteners come in handy in everyday garments, and it's a useful skill to master!


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
Tiếng Việt
bahasa Indonesia
Current language:English