Can You Hammer Corrugated Fasteners?
Corrugated fasteners, also known as wiggles, are thin pieces of metal with evenly spaced teeth or bumps designed to hold two pieces of wood together. They have been used in the woodworking industry for several decades, and their popularity has only increased over the years. Corrugated fasteners are an excellent choice for joining wood pieces, especially for those who do not have access to power tools. But, can you hammer corrugated fasteners effectively? In this article, we will address this question and other aspects of corrugated fasteners you should know.
Understanding Corrugated Fasteners
Corrugated fasteners work by biting into the wood fibers from opposite sides, drawing the pieces together. The fasteners are driven through pre-drilled holes in the wood, joining them firmly. The zigzag or wavy pattern of the fasteners increases their holding power and prevents the wood from splitting. Corrugated fasteners are ideal for use in applications like building picture frames, furniture, and cabinet panels.
Hammering Corrugated Fasteners
With the right care and technique, hammering corrugated fasteners can be successful. However, using a nail gun is a more efficient and precise method. But for those who don't own a nail gun, a hammer can still be used providing that the right type of hammer is used to prevent damage to the fastener.
Hammer selection is essential when driving corrugated fasteners. You should use a hammer with a flat, smooth face to avoid damaging the fastener. A claw hammer is a suitable option due to its flat head, making it ideal for driving corrugated fasteners.
When selecting a hammer, ensure that it is the correct size for the job. A larger hammer may not necessarily ensure that the fastener is driven in correctly. A hammer that is too small for the job may not deliver enough force to drive the fastener in completely.
Corrugated fasteners require a specific driving technique for secure attachment. To start with, pre-drill the holes for the corrugated fasteners using a drill. Insert the fastener into the pre-drilled hole and drive it in perpendicular to the wood surface. Drive the fastener from one side of the workpiece while holding it in place with the other hand.
Always make sure your wood pieces are properly aligned before fastening them with corrugated fasteners. The fasteners are designed to hold two pieces of wood together and cannot compensate for misaligned workpieces.
In conclusion, it is possible to use a hammer to drive corrugated fasteners into wood. However, you must use the right hammer face and size of hammer for effectiveness. Remember to always pre-drill holes, align workpieces correctly, and drive the fasteners perpendicular to the surface for a sturdy joint. While hammering corrugated fasteners will require more time and effort than using a nail gun, it can be a decent choice for those who do not have access to power tools..